Sony SNC-DM110 & SNC-DS10

Moderators: HeneryH, TimG

Post Reply
belgianstyle
Posts: 4
Joined: Sun Aug 02, 2020 10:43 pm

Sony SNC-DM110 & SNC-DS10

Post by belgianstyle » Thu Dec 01, 2022 6:03 pm

I recently received a Sony SNC-DM110 & SNC-DS10. They both seem to be in the same model family based on the datasheet and support RTSP [https://pro.sony/s3/cms-static-content/ ... 595914.pdf]. I was able to factory reset them and login to their settings via the web & the Sony SNC Toolbox. The network IP camera configuration finds these cameras and reports the below, however I am unable to get BI to show the camera feed. Does anyone have any experience with these cameras and can point me in the direction to configure them or BI to view the feed?

Code: Select all

Opening 192.168.1.XXX port 80...
HTTP Get / request...
Redirected to 192.168.1.XXX:80
OK
ONVIF GetSystemDateAndTime
HTTP 12152
Opening 192.168.1.185 port 8999...
ONVIF GetSystemDateAndTime
HTTP 12029
Checking for common cameras...
Foscam FI86xx/98xx compatible?
Foscam FI89xx compatible?
Foscam FI9821 V2 compatible?
Foscam FI9821 media port compatible?
Cantonk port 34567?
RTSP port open?
RTSP port detected!
Done

Code: Select all

Opening 192.168.1.XXX port 80...
HTTP Get / request...
Redirected to 192.168.1.XXX:80
OK
ONVIF GetSystemDateAndTime
HTTP 400
Requesting device information...
Bad response
GetCapabilities...
Bad response
Opening 192.168.1.186 port 8999...
ONVIF GetSystemDateAndTime
HTTP 12029
Checking for common cameras...
Foscam FI86xx/98xx compatible?
Foscam FI89xx compatible?
Foscam FI9821 V2 compatible?
Foscam FI9821 media port compatible?
Cantonk port 34567?
RTSP port open?
RTSP port detected!
Done

I am new to BlueIris, currently using the demo license (not sure if that affects anything).
User avatar
TimG
Posts: 2467
Joined: Tue Jun 18, 2019 10:45 am
Location: Nottinghamshire, UK.

Re: Sony SNC-DM110 & SNC-DS10

Post by TimG » Fri Dec 02, 2022 4:24 pm

Demo mode shouldn't prevent you adding a camera, but it might limit how many you can add.

The info file I found is here. It shows that you should be able to view these cameras in a web browser with the default IP, or the new one if you have set the IP address up. Does that work ?
Forum Moderator.
belgianstyle
Posts: 4
Joined: Sun Aug 02, 2020 10:43 pm

Re: Sony SNC-DM110 & SNC-DS10

Post by belgianstyle » Sun Dec 04, 2022 11:08 pm

I've only attempted to add 3 cameras so I believe I'm under the demo license camera limit. While viewing the IP from a web browser I do successfully get to the camera "homepage" and am able to access and login to the settings as well as take a still image from the camera. Screenshots are below. I can provide some screenshots for the setting screens as well if helpful.
Screen Shot 2022-12-04 at 2.58.34 PM.png
Screen Shot 2022-12-04 at 2.58.59 PM.jpg
User avatar
TimG
Posts: 2467
Joined: Tue Jun 18, 2019 10:45 am
Location: Nottinghamshire, UK.

Re: Sony SNC-DM110 & SNC-DS10

Post by TimG » Mon Dec 05, 2022 7:01 am

Yes, please do. You need to be outputting something from the camera that BI5 can understand. ONVIF or rtsp feeds are the usual. Anything like h264 is good, but make sure it is set to basic rather than plus or enhanced options.
Forum Moderator.
belgianstyle
Posts: 4
Joined: Sun Aug 02, 2020 10:43 pm

Re: Sony SNC-DM110 & SNC-DS10

Post by belgianstyle » Tue Dec 06, 2022 8:57 pm

Agreed, and even though I see the datasheet say RTSP, I haven't seen any mention of it in the settings. I've included 3 screenshots of the seemingly relevant settings pages below. Due to forum limits, I wasnt able to include any more, but I uploaded every setting page to Imgur https://imgur.com/a/wlaegnP
Attachments
Screen Shot 2022-12-06 at 12.23.50 PM.jpg
Screen Shot 2022-12-06 at 12.22.58 PM.jpg
Screen Shot 2022-12-06 at 12.23.07 PM.jpg
User avatar
TimG
Posts: 2467
Joined: Tue Jun 18, 2019 10:45 am
Location: Nottinghamshire, UK.

Re: Sony SNC-DM110 & SNC-DS10

Post by TimG » Wed Dec 07, 2022 7:17 pm

I can't see much to adjust there for BI5. One of the other possibilities is to check out how other NVR's connect with a camera. I usually check iSpy. If they are correct then:

See this page and search for your camera.

http://yourusername:yourpassword@yourIPaddress/mjpeg has a chance if you fill in your details.
Forum Moderator.
belgianstyle
Posts: 4
Joined: Sun Aug 02, 2020 10:43 pm

Re: Sony SNC-DM110 & SNC-DS10

Post by belgianstyle » Fri Dec 16, 2022 3:14 pm

Thanks for those suggestions. I’ll try them out and report back if I ever get the cameras working.
Post Reply