It appears that one camera can stay in sync for not quite 24 hours and then gets about 8 seconds behind. Have emailed support but no reply as yet from them. Reseting camera every 24 hours at present but should not have to.

Really getting strange now. One moment the camera is in sync with the detection and with no changes at all is at least 6 seconds behind the detection. The AI is getting the right spot and zooms in perfectly. It is just the playback that is messed up so badly the person or car is actually gone in the...

And then it went back to being way out again and no sound.

I finally managed to get both streams set for 15fps but had to do it through the app. The web interface would not allow me to change the main channel. The difference now is about 3 seconds which I can live with if it stays like that.

Doesn't appear to be. I have a parked trailer in my back yard and everytime something triggers the AI says it is a car and sets the alert. I also have a tree branch and in windy conditions it say it is a person with an 86% confidence. For the trailer I had to stop it detecting cars, trucks, etc and ...

Okay have checked the camera and sub was at 10fps and main was at 25fps. Tried to up the sub to 25fps but it only goes up to 15fps. Tried them to lower the main to 15fps which it shows but it will not come off 25fps. However after the change it is once again displaying the location of the detection ...

The reolink does not appear to have an iframe setting as such as I mentioned above. Not sure if the main and sub streams are the same. I doubt if they are. I have not changed anything and the camera has once again gone from displaying exactly the correct area and time to being 7 seconds delayed from...

I am trying out a new server with a Gfx card in it. I have two cameras set up and both working fine. I have the AI software doing the confirmation. Then yesterday the camera doing outside seemed to be lagging behind. It was displaying the ident box in the shape of the car or person as they went by b...

It is running under Windows 11 on my server direct. Used to have it virtualized but had the server spare so went for the un-virtualized way. The drives are controlled by the RAID controller and are passed through to the OS depending on how they are set up. I just have them set up as RAID0 and pass e...

Oh the camera is working just fine. I hooked it to my Synology and it displayed a picture fine. Half way through today my Lenovo X3650M5 once again failed through the IMM and same warning message of "The following VDs are missing: 000" Was able to once again clear it and rebooted the serve...

Power was shut off to my house for 2 hours. The PC shut down once the UPS power ran out. Once the power came back up there appeared to be issues with my Lenovo X3650M5 saying there was drive issues. Finally cleared this and got it to boot up. The software went through and rescaned all the alerts whi...