Steadily growing since the update. Does anyone have a solution?
Memory leak on version 5.8.0.5
Re: Memory leak on version 5.8.0.5
5.8.1.0 does not solve the issue either:
Steadily growing since the update. Does anyone have a solution?
Steadily growing since the update. Does anyone have a solution?
Re: Memory leak on version 5.8.0.5
Go back to the last stable release? Have you tried that?
Re: Memory leak on version 5.8.0.5
Ever increasing RAM usage:
Re: Memory leak on version 5.8.0.5
Nobody will really know as versions and updates, made in each version aren’t really that well documented. The BI help file normally has an overview of the main changes so take a look and see which features you use might be impacted.
Re: Memory leak on version 5.8.0.5
Also you could try disabling hardware acceleration as a first step to try and identify the cause.
In the past I have read of cams that have hardware acceleration enabled but that for whatever don’t like or support it causing memory issues
In the past I have read of cams that have hardware acceleration enabled but that for whatever don’t like or support it causing memory issues
Re: Memory leak on version 5.8.0.5
Really, really strange but my test system with 5.8.0.16 has now randomly started crashing since the last 3-4 days.
Seems like a few of the cams go into constant trigger mode which then kills the system. Interestingly enough the RAM usage is below 2gig but the CPU is pegged out at 100% with some of the cams showing the no signal static image.
I’ve just updated it to 5.8.1.1 to see what happens and will report back.
As I said, really strange as it’s been running .15 and .16 without any issues for quite a while so why it’s just started having issues I’ve no idea.
Seems like a few of the cams go into constant trigger mode which then kills the system. Interestingly enough the RAM usage is below 2gig but the CPU is pegged out at 100% with some of the cams showing the no signal static image.
I’ve just updated it to 5.8.1.1 to see what happens and will report back.
As I said, really strange as it’s been running .15 and .16 without any issues for quite a while so why it’s just started having issues I’ve no idea.
-
Swanny_221
- Posts: 13
- Joined: Sun Oct 08, 2023 2:08 pm
Re: Memory leak on version 5.8.0.5
I've been on .14 for a while and have not seen the memory issue since going there up from .04, and at Ken's suggestion, immediately doing a database rebuild to bring it up to current spec.
BI 5.Recent / Dell i7-8700 / 16 GB RAM / SSD Boot drive & Database / 8 TB & 4TB Storage drives / No software installed except Windows 10 & BI
Memory leak on version 5.8.0.5
Hmm I didn’t do a database rebuild but as yesterday was Sunday the maint task should have now run.
I also don’t recall the update performing a rebuild if it is required but there again I wasn’t really watching it they close.
I also don’t recall the update performing a rebuild if it is required but there again I wasn’t really watching it they close.
Re: Memory leak on version 5.8.0.5
I feel a bit daft, I did get a reply from... Ken 
but somehow Office 365 /Microsoft decided it was SPAM.
On his request I have added blueiris.exe and c:\Blueiris to the exclusion list of Microsoft Defender (Page 225 of the manual) and am now updating the Intel(R) Iris(R) Xe Graphics drivers from 31.0.101.4885 to the latest version (31.0.101.4972), hopefully this solves the memory leak!
but somehow Office 365 /Microsoft decided it was SPAM.On his request I have added blueiris.exe and c:\Blueiris to the exclusion list of Microsoft Defender (Page 225 of the manual) and am now updating the Intel(R) Iris(R) Xe Graphics drivers from 31.0.101.4885 to the latest version (31.0.101.4972), hopefully this solves the memory leak!