objects are blurred

mpl · Post by **mpl** » Sun Jan 14, 2024 7:43 pm

Hello, im now on day six in the Demo and nearly to buy the Full version

I have now a problem that sometimes a moved object in the Snapshots are blurred.

Is there Something wrong my settings? is my hardware to slow?

: Screenshot 2024-01-14 204025.png (51.56 KiB) Viewed 38395 times

: Screenshot 2024-01-14 203249.png (127.75 KiB) Viewed 38395 times

: Cam3.20240114_202150000.11.jpg (233.91 KiB) Viewed 38395 times

IAmATeaf · Post by **IAmATeaf** » Mon Jan 15, 2024 9:33 am

What cam do you have and what are its settings in terms of, shutter, video codec, bitrate etc.

BI just takes whatever stream you feed so if you are getting blurring, trailing or pixelation then start by looking at the settings within the cam itself.

IAmATeaf · Post by **IAmATeaf** » Mon Jan 15, 2024 11:37 am

One other thing go I’ve remember is I used to get this ghosting when using specific video graphics drivers. So again something worth checking to see what version you have installed and if there is a manufacturer tested update available.

mpl · Post by **mpl** » Mon Jan 15, 2024 4:33 pm

Hello,

i have one Dahua, one Dallmeier and a Hikvision.

The ghosting is on each cam. Bevor BI i run Zoneminder on the Same host, there was no Problem with it.

graphic is onboard on the Intel i3-8109. Driver is installed from the Driver Tool and Up to date

TimG · Post by **TimG** » Mon Jan 15, 2024 7:32 pm

H.264B - Does the 'B' mean "Basic" ? Is there a lower and possibly more compatible version of H264 ? Probably not if it is the same on three cameras. Bit rates are high enough too.

Please show the Blue Iris status/ Cameras screen.