Cannot get overlays using Codeproject AI

[totalimpact]

I setup code project AI for ALPR and it works, but I can not easily access the ALPR info. I hope to get to it from UI3 web. Currently I can select Vehicles in the filter, and the thumbnail shows the ALPR overlaid under the plate. If I right click the clip thumbnail and go to properties, then I can get a large image with the ALPR info overlaid, but no other method shows me this. If I double click the clip it just shows either the raw video or jpg with no ALPR overlaid. Is there a setting that would prevent the overlay from being seen?


That is a screenshot from this youtube video: https://youtu.be/jqc1ukrkMmI?t=1030

This is the only way I can get similar results, and it does not seem like the right procedure:

Doing that opens a medium jpg with the ALPR info overlaid.

The thumbnails and preview frame all have the orange overlay. but opening the video has none and I cant find a jpg with ALPR:


Looking under Alerts or Vehicles I get the same experience with no good way to get to the full screen image with ALPR overlay.

[TimG]

I do it by using the BI5 "&Plate" variable, and the BI5 method of adding overlays to the recording:

1. In BI5 General settings, click on the Macros tab.
2. Choose an empty macro number. In my case %2.
3. Add "&Plate" without the quotation marks. Press OK.
4. In the ANPR BI5 camera settings, go to Video/ Display overlays live.
5. Click "Edit overlays".
6. Click "Add text/time".
7. Add "%002" on the top line.
8. Choose font size and colour and press OK.
9. Choose position of text box.

Now when BI5/CPAI spots a plate, the plate number will appear on the screen, and BI5 will record it there.

You can also use &Plate with MQTT to send the number plate to home automation systems:

plate.png (95.7 KiB) Viewed 1761 times

Where my full Payload is: { "plate":"&PLATE", "Alert_AI":"&MEMO", "Type":"&TYPE","trigger":"ON"}

I presently use that with HomeSeer to flash my garage lights as I drive up the road

[totalimpact]

Thanks so much Tim, that made this feature so much more useful and logical. One last question, do you know the variable to show the confidence level also?

[TimG]

See my MQTT payload above, but have a look at the Help file (link in my signature) and search for &PLATE. That will show you all of the options available. I think you are looking for &MEMO which in MQTT would output DayPlate:confidence% like this:

alpr.png (7.72 KiB) Viewed 1695 times

That is what Homeseer MQTT gets from BI5 with that variable. Experimentation is key, but you are very close.

[totalimpact]

The documentation says &Memo, but that does not seem to work right. If I set Macro %3 to &Memo, the resulting text just says "Active" all the time, and never shows a Confidence level. Do you know if it is possible to combine variables in a single macro? Or do I just need to overlay 2 macros?