Because of headlights lighting up portions of the front yard, I can't rely on motion detection at night.
In order to schedule motion detection to turn off at sunset and on at sunrise for all 7 days of the week, the green bars need to be between the default grayed sections.
For Profile 1 for example, I need detection off from midnight to 7 AM. Then detection on from 7AM to 7 PM (green bars). Then detection off from 7 PM to midnight.
I haven't figured out how to do that. That is possible, correct?
If I can get some help with that, I believe I could get the sunset/sunrise schedule incorporated with it and not have to actually rely on set times.
Thanks!
Schedule for just daylight hours?
Re: Schedule for just daylight hours?
Not an expert but I never touch Profile 1.
What I've done is rename Profile 2 to Day and Profile 3 to Night. Then within each cam setup the times for each profile. I use these profiles to disable alerts during the day on some of cams. If the profile is working and switching in the mobile app the cam will have a 2 or 3 in the top right corner when looking at the Cameras view.
What I've done is rename Profile 2 to Day and Profile 3 to Night. Then within each cam setup the times for each profile. I use these profiles to disable alerts during the day on some of cams. If the profile is working and switching in the mobile app the cam will have a 2 or 3 in the top right corner when looking at the Cameras view.