Rockit, I am having almost an identical issue. I was having harddrive issues and thought this was a symptom of that however, I have resolved those issues and these continue. In addition to your issues I am also not able to maximize any camera on my BlueIris application itself.
Has not running as a service given you any improvement.
Blue Iris 5 Web Server Stops Working
-
Thixotropic
- Posts: 747
- Joined: Wed Sep 04, 2019 7:20 pm
- Location: Low-Earth Orbit
Re: Blue Iris 5 Web Server Stops Working
This sounds similar to an issue I've had with almost every other release of BI recently, at least the last 8 or 9 releases I think, and it's become very annoying.
On my system it seems to be caching mouse clisks. If I double-click on a screen, nothing happens, but if I then single click on another cam screen it'll go full-screen. The only thing you can do is set the double-click action under the Cameras tab to "Temporary single camera layout". It's not the same but it's close.
Blue Iris 5.x x64 | Windows 10 Pro x64 | 16GB RAM | i7-7700 3.6 GHz | 1TB HDD | 2TB RAID NAS | 9 Cameras | Almost Dual NIC | 2KVA UPS
Re: Blue Iris 5 Web Server Stops Working
straes, that is good news for me ( 
). I was worried about the problem being related to hardware (it still could be though, I'm running an Dell Otiplex 7070 i9).
Just to add, I also can't maximize the cameras when this happens. Another problem I've noticed is that when i update BI it cant close the application, I have to manually do it when its time to restart BI.
I've been running BI as a stand alone program (not as service) and its been working since then (>24h).
). I was worried about the problem being related to hardware (it still could be though, I'm running an Dell Otiplex 7070 i9).Just to add, I also can't maximize the cameras when this happens. Another problem I've noticed is that when i update BI it cant close the application, I have to manually do it when its time to restart BI.
I've been running BI as a stand alone program (not as service) and its been working since then (>24h).
Re: Blue Iris 5 Web Server Stops Working
I have a similar issue each time I update as well. Mine has been running and accessible for 12 hours now, which is a record lately to make it through the night. I'm not sure what I did other than change my IP address from static within the computer back to assigned from the router. I wouldn't think that would have any effect on the local application though.
Re: Blue Iris 5 Web Server Stops Working
It didn't make it 24 hours. I've now swapped from a service as well to see how that goes.
Re: Blue Iris 5 Web Server Stops Working
Same here, I found in the Win log manager that BI had crashed with exception code 0xc0000005 and it doesn't look good if you read in this thread:
https://ipcamtalk.com/threads/faulting- ... dll.46039/
https://ipcamtalk.com/threads/faulting- ... dll.46039/
What we have common is that we run Dell and both have had hard drive problems that have been resolved.The exception code 0xc0000005 indicates a memory access violation. That most likely means you've found a programming bug in Blue Iris (good luck figuring out the exact cause though). It could also unfortunately be the fault of any third-party code Blue Iris uses, or it could be your PC hardware's problem.
Last edited by rockit on Mon Apr 06, 2020 8:13 pm, edited 2 times in total.
Re: Blue Iris 5 Web Server Stops Working
Since I activated log to file in BI I can see that this happens when there is movement in BI. Its not sitting idle and bugging out.
Re: Blue Iris 5 Web Server Stops Working
I found this tread where the crashed was related to the alert reporting (https://blueirissoftware.com/forum/view ... 4206#p4206)
And I've been having problems with the Windows popup alert not working, so I disabled it and its now been >24h.
Maybe disable alert types and see what works...
Re: Blue Iris 5 Web Server Stops Working
What I've found is that it seems BI randomly looses the ability to bind to the server port. If you open a dos prompt and type "netstat -an | findstr 81" where 81 is your port number if you've changed it.
When it's broken, you won't see anything. When it's working, you'll see the port.
I had some emails back with Ken and he mentioned that it will be added as a feature to monitor the web server. That's good..
However, I think I may have other issues because sometimes after a reboot it doesn't work right away. Anyone with advice on this?
When it's broken, you won't see anything. When it's working, you'll see the port.
I had some emails back with Ken and he mentioned that it will be added as a feature to monitor the web server. That's good..
However, I think I may have other issues because sometimes after a reboot it doesn't work right away. Anyone with advice on this?
Re: Blue Iris 5 Web Server Stops Working
I started getting a red shield error when BI would not record alerts. This started a week or so ago and I have tried deleting cameras and reinstalling, this and that. I have made a change in the setting on the Startup Tab. I noticed it was set to start with a red shield. I also changed my delay time to a full minute and so far, this has worked. I will add a screenshot of the changes made.
- BlueIrisRedShield.jpg (100.14 KiB) Viewed 16345 times