Page 1 of 1
Skips motion every day at certain time.
Posted: Thu Apr 01, 2021 2:00 pm
by lands1ide
I have one camera that skips all recordings from 1:00AM to 4:00AM. I have checked it every day and it skips this time every day. I have 2 other cams in that direction so I know there should be recordings. I check my schedule and it is set for a 24 hour period. Any idea what could cause this? I have it set to direct to disc, BVR, 4 hour intervals. My other cams have the same perimeters with no issues.
Re: Skips motion every day at certain time.
Posted: Thu Apr 01, 2021 3:04 pm
by TimG
If you can't find it in BI, have a look in the camera web interface menu's to see if something is amiss there.
Re: Skips motion every day at certain time.
Posted: Thu Apr 01, 2021 4:42 pm
by lands1ide
I have checked the camera and it is not the issue. It is something in BI5 on this PC. I have a redundant recording system on another PC with BI4 and it is recording all the missing motion records just fine. The settings are the same on both. One is recording (BI4) and one does not (BI5). It is always only from 1 to 4am.
Re: Skips motion every day at certain time.
Posted: Thu Apr 01, 2021 5:33 pm
by TimG
Yes, your redundant system clarifies that all right
Can you set up a clone and see if that does the same ?