- Screenshot small.jpg (69.94 KiB) Viewed 2415 times
Live view only working for selected camera
-
TonyBlack1964
- Posts: 2
- Joined: Mon Aug 30, 2021 11:58 am
Live view only working for selected camera
Hoping someone can put me straight on this. Previously I had Blue Iris configured so that all cameras (x8) were showing live all the time. Now, and I don't know why, only the camera that is selected will show live view. Any ideas?
-
TonyBlack1964
- Posts: 2
- Joined: Mon Aug 30, 2021 11:58 am
Re: Live view only working for selected camera
OK, have answered my own question. I had enabled the 'Limit decoding unless required' option for all cameras hoping to reduce the CPU usage. It did drastically reduce CPU usage but it also disabled live view for all except a selected camera. Will have to live with the high CPU usage.
Re: Live view only working for selected camera
You might consider reviewing Optimizing Blue Iris's CPU Usage
- "Whenever I take something apart to fix it and put it back together again, I end up with like six really important looking pieces left over" -Tim Allen
- If you know what your after, you'll recognize it when you see it.