Does anyone have any ideas of how to reconfigure Blue Iris to save this virtual camera output so its overlay text is visible during play back later?
- BI_WX.JPG (42.21 KiB) Viewed 1684 times
Screen Capture (Blackness) virtual camera won't record
-
scifiguy655
- Posts: 5
- Joined: Thu Sep 16, 2021 1:44 pm
Screen Capture (Blackness) virtual camera won't record
I use Blue Iris Tools to capture a weatherunderground station near me and display it as overlay text in a virtual camera. This is meant to document the current weather conditions (see attachment below). I have this virtual camera set to record, but BI does not create any clip files of this 'stream'. Because of this, when I go back to view past video of this camera, it is just a black screen with no text. The camera type I set up is currently set to "Screen capture" Blackness/Primary.
Does anyone have any ideas of how to reconfigure Blue Iris to save this virtual camera output so its overlay text is visible during play back later?
Does anyone have any ideas of how to reconfigure Blue Iris to save this virtual camera output so its overlay text is visible during play back later?
Blue Iris 5.x x64 | Windows 10 Pro x64 | 16GB RAM |AMD Phenom II X6 1090T @ 3.0 GHz| 1TB Fusion I/O SSD |12TB HDD | Nvidia GTX 1050 Ti |4 Reolink RLX-810A Cameras |1 Reolink RLC-510A Camera |1 SV3C PTZ Camera |Dual NICs | 4K Monitors
Re: Screen Capture (Blackness) virtual camera won't record
I do the same. Works for me.
Post captures of ...
- Record tab
- Video tab
- Video tab/edit overlay
- Video tab/edit overlay, right-click one of the overlays and post that.
Post captures of ...
- Record tab
- Video tab
- Video tab/edit overlay
- Video tab/edit overlay, right-click one of the overlays and post that.