Improvement to accuracy of CPU Utilization in 5.0
Posted: Tue Jul 23, 2019 6:28 pm
Wanted to let everyone know, under 4 I had this issue where I would see some pretty drastic (like between 20 and 40%) difference between the CPU utilization as reported on the BI panel, in comparison to either task manager or an independent utility. BI always reported the CPU as LOWER than actual.
So, since 5 upgrade, I don't know what is changed, but the discrepancy is now within 2 to 5% and even that is not all the time, most times they track each other fairly well.
For reference, I'm running a Gigabyte MB with an Intel I7 8700 6 CPU core, Windows 10, 12GB of DDR4 memory, and 2 solid state SATA drives, one for OS and base software, the other is my storage drive.
I'm running 18 cameras with H264 video and CPU stays in the 40% range which varies based on the # of cameras sensing motion.
Love BI!!
Glenn
So, since 5 upgrade, I don't know what is changed, but the discrepancy is now within 2 to 5% and even that is not all the time, most times they track each other fairly well.
For reference, I'm running a Gigabyte MB with an Intel I7 8700 6 CPU core, Windows 10, 12GB of DDR4 memory, and 2 solid state SATA drives, one for OS and base software, the other is my storage drive.
I'm running 18 cameras with H264 video and CPU stays in the 40% range which varies based on the # of cameras sensing motion.
Love BI!!
Glenn