BI + Reolink 410 and 511 Cameras
Posted: Mon Jan 01, 2024 2:25 am
I constantly get "No Signal" from all 6 of my Reolink cameras. I never know when it will happen or which one. Strange enough, the Reolink software never fails to recognize them, only BI, so is a BI issue. In any case, if you have a solution, please post.
I have 2 Empire Tech cameras (8-32mm) that are flawless for use w/BI, but NOT the Reolink cameras.
Any suggestions for Reolink replacements? I have RLC410 5MP and a RLC511, all POE, but am not opposed to tourette cams.
Note: I have recently updated the firmware in Reolink cameras and it made zero difference. BI notes that there is "no signal". This is true as the frames per second drop to around 1.5/s while in failure mode. I'm starting to wonder if the cameras require some type of constant polling to keep them sending data or what the deal is. My watchdog is set to reboot, but makes no difference. The only thing that works usually is a complete reboot of my PC and it doesn't matter whether its my laptops or main pcs.
I have 2 Empire Tech cameras (8-32mm) that are flawless for use w/BI, but NOT the Reolink cameras.
Any suggestions for Reolink replacements? I have RLC410 5MP and a RLC511, all POE, but am not opposed to tourette cams.
Note: I have recently updated the firmware in Reolink cameras and it made zero difference. BI notes that there is "no signal". This is true as the frames per second drop to around 1.5/s while in failure mode. I'm starting to wonder if the cameras require some type of constant polling to keep them sending data or what the deal is. My watchdog is set to reboot, but makes no difference. The only thing that works usually is a complete reboot of my PC and it doesn't matter whether its my laptops or main pcs.