IMOU Crusier SE+ PTZ
Posted: Sun Aug 18, 2024 8:47 am
Hi,
For you who struggeling with IMOU Crusier SE+ and PTZ this is how you set it up:
Copy this:
rtsp://admin:[PASSWORD]@[IP_ADDRESS]:554/cam/realmonitor?channel=1&subtype=0&unicast=true&proto=Onvif
Enter password in the Passwordbox (The password can be found on the label on the camera if you haven't changed it)
Change Dicovery/ONVIF port to 3777 (the image will work without changing but not the PTZ)
On the PTZ/Control tab you need to
Choose ONVIF and specify the port :80 AND check Require Admin
That did it for me
For you who struggeling with IMOU Crusier SE+ and PTZ this is how you set it up:
Copy this:
rtsp://admin:[PASSWORD]@[IP_ADDRESS]:554/cam/realmonitor?channel=1&subtype=0&unicast=true&proto=Onvif
Enter password in the Passwordbox (The password can be found on the label on the camera if you haven't changed it)
Change Dicovery/ONVIF port to 3777 (the image will work without changing but not the PTZ)
- IMOU Crusier_1.png (56.61 KiB) Viewed 6416 times
Choose ONVIF and specify the port :80 AND check Require Admin
- IMOU Crusier_2.png (37.75 KiB) Viewed 6416 times
That did it for me
