Avigilon ENC-4P-H264 Four Port encoder
Posted: Thu Jan 02, 2025 7:04 pm
I am evaluating BI as a replacement for some clients with small installation that are using the Avigilon ENC-4P-H264 four port encoder.
I have successfully tested and have working the Avigilon H4A and H5A cameras as a test, but am unsure of the settings to get the four port encoders working.
the encoders are factory reset, the default settings presented by BI for the encoder present the rainbow, then fail to Encloder: No Signal.
(I know the camera is sending NTSC video with my handheld test tool...)
I would greatly appreciate any tips on the proper settings for these encoders.
Thanks
I have successfully tested and have working the Avigilon H4A and H5A cameras as a test, but am unsure of the settings to get the four port encoders working.
the encoders are factory reset, the default settings presented by BI for the encoder present the rainbow, then fail to Encloder: No Signal.
(I know the camera is sending NTSC video with my handheld test tool...)
I would greatly appreciate any tips on the proper settings for these encoders.
Thanks