Corrupt video when using direct-to-disk with hikvision ds-2cd2385fwd-i
Posted: Tue Aug 18, 2020 6:46 am
Hey guys, I've been trying to find the reason but can't really figure it out... There seems to have some issue when trying to use a high resolution stream from my hikvision camera: ds-2cd2385fwd-i. I do have couple of cameras and they all doing the same thing. If I reset setting the mp4 file will be fine but it seems after a while (like a day or so), all of the alerts mp4 files get corrupted.
- Doesn't seem to be a codec issue as I'm able to view them (after camera reset)
- I'm getting a good fps (18fps at night and 30fps at day)
- A try to disable the hardware accelerated decode in blue iris settings but no luck.
Any help would be appreciated!
blue iris config:
https://ibb.co/qJT8FRD
https://ibb.co/hB9VtMv
Hikvision config:
https://ibb.co/d2pGy2y
- Doesn't seem to be a codec issue as I'm able to view them (after camera reset)
- I'm getting a good fps (18fps at night and 30fps at day)
- A try to disable the hardware accelerated decode in blue iris settings but no luck.
Any help would be appreciated!
blue iris config:
https://ibb.co/qJT8FRD
https://ibb.co/hB9VtMv
Hikvision config:
https://ibb.co/d2pGy2y