Page 1 of 2
Chinese PTZ Kamera
Posted: Tue Nov 03, 2020 11:24 am
by hughirschmann
Does anyone got this camera running (see picture).
I have problem with the settings.
Thank you
Kai
Re: Chinese PTZ Kamera
Posted: Tue Nov 03, 2020 3:05 pm
by MikeBwca
A bit of information would be helpful...
- Make
- Model & version
- Website/link to product page.
Re: Chinese PTZ Kamera
Posted: Tue Nov 03, 2020 4:49 pm
by hughirschmann
Camera manufacturer is WTHUNG
Model CP 08-23
I found not many information
Here is the link:
https://www.gearbest.com/ip-cameras/pp_ ... 70329.html
Thank you
Re: Chinese PTZ Kamera
Posted: Tue Nov 03, 2020 7:26 pm
by Matts1984
Details on the problem would be helpful too
Re: Chinese PTZ Kamera
Posted: Wed Nov 04, 2020 9:34 am
by hughirschmann
I need the seeting due of getting no picture.
I can find the camera via search but no signal
Re: Chinese PTZ Kamera
Posted: Wed Nov 04, 2020 7:07 pm
by Thixotropic
It says it supports ONVIF; can you post the results of an ONVIF search/probe so we can see them?
Re: Chinese PTZ Kamera
Posted: Thu Nov 05, 2020 12:11 pm
by hughirschmann
Hello,
thank you. I fot the following feedback:
Opening 192.168.0.12 port 80...
HTTP Get / request...
Redirected to 192.168.0.12:80
OK
ONVIF GetSystemDateAndTime
2020-11-05T12:10:31.000Z
Requesting device information...
Manufacturer: EYEPLUS
Model: EYEPLUS_DEV
FirmwareVersion: 3.4.2.0725
GetCapabilities...
Querying services
Has Imaging services: /onvif/Imaging
Has media services: /onvif/Media
Has RTP_RTSP_TCP, requesting profiles
first profile is Profile_1
first source is VideoSource_1
requesting URI for profile Profile_1
RTSP URI: /
Has Event services: /onvif/Events
Has WSPullPointSupport
RelayOutputs: 0
InputConnectors: 0
Has Device IO services: /onvif/DeviceIO
AudioOutputs: 1
Has PTZ service: /onvif/PTZ
Done
Re: Chinese PTZ Kamera
Posted: Thu Nov 05, 2020 3:14 pm
by Thixotropic
That's odd; it all looks okay to me so I'm not sure why BI won't pick up the video. (??)
Have you adjusted the video/RTSP URLs in BI to make sure they're pointing to the correct path?
hughirschmann wrote: ↑Thu Nov 05, 2020 12:11 pm
Hello,
thank you. I fot the following feedback:
Opening 192.168.0.12 port 80...
HTTP Get / request...
Redirected to 192.168.0.12:80
OK
ONVIF GetSystemDateAndTime
2020-11-05T12:10:31.000Z
Requesting device information...
Manufacturer: EYEPLUS
Model: EYEPLUS_DEV
FirmwareVersion: 3.4.2.0725
GetCapabilities...
Querying services
Has Imaging services: /onvif/Imaging
Has media services: /onvif/Media
Has RTP_RTSP_TCP, requesting profiles
first profile is Profile_1
first source is VideoSource_1
requesting URI for profile Profile_1
RTSP URI: /
Has Event services: /onvif/Events
Has WSPullPointSupport
RelayOutputs: 0
InputConnectors: 0
Has Device IO services: /onvif/DeviceIO
AudioOutputs: 1
Has PTZ service: /onvif/PTZ
Done
Re: Chinese PTZ Kamera
Posted: Fri Nov 06, 2020 8:33 am
by hughirschmann
Hello,
I have the following settings (see picture in the attachement).
Thank you
Re: Chinese PTZ Kamera
Posted: Fri Nov 06, 2020 6:20 pm
by TimG
Hiya,
1. Does it work with the android/ Ios YCC365 App ?
2. Are the User and Pass default, or did you set them up your self ?